1HL 1BBL home beer brewing brewhouse manufacturer near Los Angeles ZXF

1HL 1BBL home beer brewing brewhouse manufacturer near Los Angeles

100L 1BBL home beer brewing brewhouse are in hot sale in Los Angeles,the ditailed infor are as followed:

The inner tank and outer material are made of SUS304, the thickness is 3mm, and the outer material is 2mm thick. 

Dimensions: D=650, H=1660mm; 2. Electric heating tube. The heating meets the temperature rise of 1-1.5 degrees per minute. Heat-resistant polyurethane foam, with a thickness of 75mm. 

The side feed is filtered, and the quick installation manhole is installed on the side. 3. Heat-resistant polyurethane foam, with a thickness of 75mm. 4. The diameter of the upper steam discharge pipe is ￠63. 5. The upper part of the filter is designed with an open cover and the side outlet; the upper steam discharge pipe has a diameter of ￠63. Configure CIP cleaning ball. 6. Filter plate: milling. The material is SUS304, the opening rate is about 10%; the surface is bright and flat;

Rotary sinking counterclockwise tangential feeding, the feeding port is 1/3 below the liquid level; it has a liquid level tube and a breathing hole. There is a bypass between the suspension discharge pipe and the sewage pipe. 6. The precision of platinum resistance is ±0.3 degrees Celsius, and the temperature range is 0-150 degrees Celsius. 

The interior of the equipment is highly polished, and the welding seam is finely processed, without uneven deformation, etc.; the appearance of the equipment is beautiful, and the pipeline layout and opening positions meet the requirements of operation, site installation and visit.

The connecting valve pipeline uses sanitary quick-fit joints, with a backing plate inside, no leakage, spare parts are installed at the factory, and the service life of the equipment is more than 30 years.

Miller board cooling, material SUS304, thickness 1.5mm, the cooling area of the cylinder is about 40% of the surface of the cylinder, and the cooling area of the cone is about 50% of the surface of the cone.

Double-layer belt insulation, the insulation layer is pre-buried with cold water pipes, circulating cooling, to maintain a suitable temperature environment for wort fermentation.

We are looking for equipment distributors in Los Angeles. If you are interested in home brewing equipment or have experience in beer brewing system sales, we hope to cooperate with you to develop the market for craft beer brewing equipment in Los Angeles.