500L two-vessels craft beer brewery system with jacketed fermenter manufacturer ZXF

WEMAC  500L Craft beer machine with stainless conical fermenter two-vessel brewery

Beer, with barley bud, hop, water as the main raw materials, yeast fermentation by the production of a low alcohol content with carbon dioxide, known as "liquid Bread", is a low concentration of alcoholic beverages.

Beer alcohol content is the least, so drinking beer is not easy intoxicating health, a small amount of drinking on the other is beneficial to the body. Most of the steam heating beer brewery international beers are now added as auxiliary materials.

Process of beer brewing :
Use mill to smash the grains,then transfer to brewhouse.
The brewhouse including the mash/lauter tun,boiling/whirlpool tank and hot water tank if necessary,these parts also have different steam heating beer brewery combinations.
Then the wort will go through the exchanger for cooling down and then to fermenters for fermentation process.
Our beer can be drinked in the fermenters,if need to filling inside the bottles or kegs,need the filter and filling system.

Beer mashing equipment can be divided into the following types according to different saccharification combinations:

2-vessels：Mash/lauter tun +kettle/whiripool tun

3-vessels:Mash tun + lauter tun +kettle/whirlpool tun

4-vessels:Mash tun +lauter tun+kettle tun+whirlpool tun

Generally speaking, the more tank combinations, the stronger the mash ability, and the more beer batches that can be produced every day. This also means that the cost of the equipment is higher, and the 500L two-vessel mash is the most economical and affordable compared to the three-vessel mash combination.

WEMAC will select the appropriate mash heating method for the customer according to the customer's local energy supply and demand. We will give the customer the right to choose and provide the customer with the consumption and cost of different methods. The common ones are electric heating and steam heating.

500L mash system is made of high-quality stainless steel, and the material is thicker. It is a double-walled jacket type like the  fermentation tanks,Compared with other suppliers, thick plates not only ensure the durability and reliability of the equipment, but also greatly improve the safety of operation and the stability of equipment use.

Compared with electric coil heating, steam heating has a higher heating rate and a more precise temperature control, and the heating is even and stable during the mash process, and there will be no battering during the mash.

At the bottom is a temperature sensor probe, which is connected with the PLC control system to detect the temperature in the tank, and can independently set the heating temperature and time according to the brewing process of different beer types.Fast heating rate, temperature difference accuracy does not exceed 0.2 degrees Celsius.

Mash kettle tun is with stirrer device,when mashing,the device stirring and makes the grain rotary in the inner tank,The device can be raised and lowered.

The top rotating cleaning spray ball. After the mash process is completed, the acid water/caustic water/hot water/clean water, etc. are introduced from the top cleaning port through the CIP cleaning pump to effectively clean the tank. WEMAC provides customers with CIP cleaning carts. Move according to the location of the system.

The inner surface of the tank is polished. WEMAC has professional endoscopes and other smoothness testing instruments. After repeated testing and tests, the equipment is presented to customers in perfect condition.

The top of the mash tun is equipped with a steam condensate collection and discharge port, and the elbow can be designed according to the installation position on site. top sight glass, with a search light, a gasket inside, strong sealing, and clamp connection, which is convenient for observing the mashing state in the tun.

Square holes on the side, clamp connection, silicone pad inside the door, no leakage, no dead ends, easy to clean. Factory equipped with rake, mashing measuring cylinder, sugar measure and other devices for beer brewing.

All fermentation tanks are made of high quality stainless steel (out Jacket can be 2B or high precision drawing) polishing), strick compliance with national standards, the company provides high-quality product, there is a high market share in Europe and the US, it can meet the a variety of process requirements of draft beer machine.

If you have 500L beer brewing project, WEMAC can help you realize it and open up the local market. Or if you have equipment distribution experience or ideas, please don’t hesitate to tell us that since our establishment 60 years ago, we have provided professional equipment services to customers in more than 40 countries and regions around the world, and look forward to your cooperation.